EXOTHERM
CORPORATION
 
 
 

A product of many years experience in the design and manufacture of heat transfer products, the Uniflux® heater is a completely packaged, economically priced, forced draft, convection type process heater.  Each unit is custom designed to meet the particular needs of the application presented by the customer.

    TYPICAL APPLICATIONS     

Crude Oil Regeneration Gas Fuel Oil
Emulsions Edible Oils Water
Glycol / Water Steam Superheater MEA, DEA
Reaction Heaters Air Preheaters
Cryogenic:  LNG, NH3, LPG Pilot Plants Asphalt
 


Convection heat transfer results in lower tube wall temperatures than with a radiant heater.  This allows Uniflux heaters to operate on Temperature sensitive fluids (such as MEA and DEA), and highly viscous fluids (such as asphalt).

Utilizing the complete circulation of exhaust gases around process tubes results in a convective heat transfer.  This allows the process to operate at lower tube wall and film temperatures than can be achieved with conventional radiant heaters.  The high velocity burner has a very short flame extension, preventing flame impingement on the tubes.  This in turn eliminates tube coking.
 

TECHNICAL SPECIFICATIONS
• 0.1 - 70 MMBtu/hr
• Efficiencies to 95%
• Process temperatures to 1700°F
• Process Pressures to 3000 psi
• Carbon Steel, Low & High Alloy Metallurgies available
• Gas, Oil, or Dual-Fired Designs
• Cabin or Circular Designs
• Turndown ratios up to 40:1

 

Exotherm Corporation
888 Wilcrest Drive
Houston, Tx 77042

ph.:  713-981-9100
fax:  713-981-7081
info@exotherm.com

For service, call the above numbers

or send email to:   service@exotherm.com
 

HOME    HEAT TRANSFER    Q-PAK    OIL TOOL   TECHNICAL POINTS   SPECIFICATION    RFQ   INFO    ABOUT US    GALLERY    JOBS