|
Advantages of the Uniflux HEAT EXCHANGE CABIN: |
||
|
|
UNIFORM HEAT FLUX: High circulation of exhaust gases around tubes results in a convective heat transfer to the process tubes. This means lower tube wall temperatures can be used for the same average heat transfer rate as with conventional heaters | |
| NO FLAME IMPINGEMENT: Complete combustion within the Fuel Reactor means no flames within the tube area. Tube walls are safe from flame. Coking of tubes is minimized | ||
| HIGH THERMAL EFFICIENCY: Using Uniflux tube banks alone, efficiencies up to 80% are achieved. With an economizer unit, efficiencies of nearly 95% can be achieved. Due to the controlled fuel / air ratios, Uniflux efficiencies increase as the heat load decreases. | ||
| SAFE OPERATION: No flashbacks are possible with the sealed Fuel Reactor. Inert gases in the Exchanger section cannot support combustion. | ||
| LIGHTWEIGHT INSULATION: The wall construction of the exchanger consists of a stainless steel liner with a carbon steel outer shell and lightweight, low conductivity fiber insulation sandwiched between. This cuts weight and heat retention to less than 10% of refractory linings. | ||
| SHOP ASSEMBLED: Delivered completely assembled. Only process piping and electrical connection are required. | ||
Exotherm Corporation
888 Wilcrest Drive
Houston, Tx 77042
ph.: 713-981-9100
fax: 713-981-7081
info@exotherm.com
For service, call the above numbers
or send email to: service@exotherm.com
